COLORboard is laser safe. It is a heat and pressure applied color application to MDF which allows for colors and patterns not achieved through paints or other wood finish options. COLORboards allow for a vibrant color, glitter, neon, or even metallic option for your projects. We know your projects can call for different colors and patterns so you can mix and match the front & back. COLORboards can easily be incorporated as a component into larger wood projects or even different COLORboards to make colorful wood projects.
Core: 1/8" MDF
Cut Settings: Full Power, Focus Height 0.13 inches, and Speed 170
Masking: There is a thin layer of clear masking overlying the board. This can be removed after cutting. To do so, use your fingernail or our Craft Precision Weeding Tool Set to get under the clear masking but not the adhered color sheet. While well adhered, the color sheet could be pulled up with force. Gently pull back the masking. It comes off very easily with solid colors; it is more tight on the glitter, and take particular care with the HOLOboard to remove slowly as the HOLO material can stick to the masking. Do NOT use a scraper to remove the masking as this will scratch up the color application.
We recommend for removing the masking you use one of the following methods:
No, using a sharp object to remove the masking will scratch and damage the color application. We strongly recomme
Yes, the masking comes off very easily with solid colors; it is more tight on the glitter, and take particular care with Fishscale HOLOboard to remove slowly as the material can stick to the masking.
The bubbles and creases are almost always in the masking only and not on the product itself. The masking is removed after cutting so this will not impact your finished product.
Created By: Craft Closet