Sticker Removal

Removing stickers! It’s a problem right? It’s like getting a new toy as a kid. The toy is brand new, pristine. You’re all excited to start playing with it. But first you have to remove that pesky sticker. You scratch, you scrape. Only for the sticker to peel away, leaving a layer of adhesive that gets all sticky, gunky, and tarnishes the perfect appearance of your toy.

So, How Do You Remove a Sticker Without Damaging Your Board?

Good news — we’ve got a few tried-and-true methods depending on what you have on hand:

1. Use a Hair Dryer

Set it on high heat and aim it directly at the sticker. This will soften the adhesive and help the sticker peel away cleanly.
Note: Some residual adhesive might remain. If you're planning to stain the wood, be cautious — leftover adhesive can lead to uneven absorption.

2. Mineral Spirits or Acetone Nail Polish Remover

Both work brilliantly for removing any leftover adhesive. Simply apply a small amount with a cloth and gently rub the area.

3. Rubbing Alcohol

If you don't have mineral spirits or acetone, rubbing alcohol is another great option to lift adhesive without damaging the wood.

4. Vinegar

Old-school but effective! Vinegar can also break down adhesive if you’re in a pinch.

5. No Hair Dryer? No Problem

Place a napkin or paper towel over the sticker and soak it with mineral spirits or acetone for about five minutes. The sticker should come right off with minimal effort.

6. Water (Kind of)

Water can help remove the paper part of the sticker but unfortunately won’t do much for the sticky adhesive left behind.

7. Gentle Sanding

If all else fails, a light sanding can remove any residual gunk.
Important: Be careful not to sand too deeply, especially if your board has a veneer layer.

We hope these tips make your crafting journey smoother and your boards even more beautiful. If you ever find a sticker in an inconvenient spot, now you’re armed with everything you need to remove it easily.

Good luck, and happy crafting!