Skip to content
Southern Lights Reflective Iridescent

Southern Lights Reflective Iridescent

1 Review
| Ask a question
by Acrylic

$0.00 - $0.00
$0.00
$15.00
$15.00 - $15.00
$15.00

Size:

12x19 inches* *All materials are advertised at 12x19 inches. There is some variation though due to the manufacturing and cutting process that can result in pieces being narrower in some cases. We will not send out boards less than 11.75 inches, but in particular Cracked Crystal and some other patter acrylics have special molds that are used to create the pattern. There is also some trimming of edges to avoid inconsistent patterns. This sometimes results in pieces being as narrow as 11.75 inches. If your project requires the full 12 inches, please make the order then email us at info@craftcloset.com and we will specifically pick acrylics that meet your requirements. If you ever receive an acrylic that does not meet you needs, contact us and we will correct the problem. Thank you for understanding the variation.

Thickness: 2.6mm

Features:

  • Premium quality- 1/8th inch thick (3mm) cast acrylic. Excellent optical properties, light weight and stronger than glass, this premium cast acrylic is a superior product to use for trophies, signs, handicraft, laser cutting and an endless variety of other applications
  • Northern Lights Masking- Both side is masked with a thin blue PET film to prevent scratches and to provide durability during shipping and crafting.
  • Durable, versatile and multipurpose, perfect for all your acrylic needs. This cast acrylic can be used with Glowforge, Mira, Thunder, Trotec, Epilog, and other lasers, routers, Dremels and scroll saws. It can also be glued, bent with heat, and drilled.

Iridescent Acrylic has a thin film of iridescent material adhered to the surface of clear acrylic. This film is what give the rainbow shimmer appearance. This film is very tightly adhered and when cutting with a laser, this film will not come off. However, when we cut the 4x8 sheets of Iridescent Acrylic down to 12x19, we used a saw and the teeth from the saw can sometimes cause a small edge of the film to stick up. Don’t pull on this! It is fine and does not affect the remaining part of the sheet. Just don’t use the very edge that is exposed.

Northern Light Edges